Our tech tips, vetted by our most experienced field agents, are designed to help you get the most out of your MacDermid printing materials.

Having trouble finding the tech tip you need?

Contact Us

show all Tech Tips for Sheet Plates Tech Tips for Liquid Plates
1 - Efficient Plate Production 1 - Efficient Plate Production
3 - Artwork, Negative Preparation 3 - Artwork, Negative Preparation
6 - Using the Hand Held Refractometer 6 - Using the Hand Held Refractometer
13 - Storage of Materials 13 - Storage of Materials
21 - General Handling of Blotter Rolls 21 - General Handling of Blotter Rolls
101 - M Strate 101 - M Strate
102 - M Strate AB 102 - M Strate AB
103 - Cover Films 103 - Cover Films
106 - M Jet Film Materials Specification 106 - M Jet Film Materials Specification
112 - Distortion Correction Factors for Proper Negative Preparation 112 - Distortion Correction Factors for Proper Negative Preparation
116 - Solvent Compatibility Guide 116 - Solvent Compatibility Guide
117 - Plate Masking: 3040/3048 Non-Panel/Mate 117 - Plate Masking: 3040/3048 Non-Panel/Mate
118 - Plate Masking Fine Detail or Screens: 3040/3048 Non-Panel/Mate 118 - Plate Masking Fine Detail or Screens: 3040/3048 Non-Panel/Mate
122 - Light Finishing of Liquid Photopolymer Printing Plates 122 - Light Finishing of Liquid Photopolymer Printing Plates
123 - Washout Operation with Feed and Bleed Option 123 - Washout Operation with Feed and Bleed Option
124 - Lamp Output Specifications for 4460, 4080, 5280, and 52110 124 - Lamp Output Specifications for 4460, 4080, 5280, and 52110
125 - Minimizing Liquid Resin Tote Waste 125 - Minimizing Liquid Resin Tote Waste
126 - Liquid Resin Tote Setup and Dispensing 126 - Liquid Resin Tote Setup and Dispensing